If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
DISCLAIMER: I AM NOT RESPONSIBLE TO DAMAGES OF YOUR PSP DUE TO FOLLOWING THIS GUIDE
Hi guys, here is just a guide of doing the LED triggers by soldering the LED to your PSP speakers
lets get started
WHAT YOU WILL NEED
1.Two small LED lights,prefer this TIPS FROM RA1N
2.1 small philip head screw driver
3.1 small flat head screw driver
4.Thin wires, reasons; PSP has limited space
5.Wire tape
6.Soldering iron
7.Soldering gun
8.PSP
9.Wire cutter/knife/scissors
TAKING PSP APART
1. Remove the battery and remove the screws shown,
a.
b.
c.
2.Put all the remove items in safe place
3.Here you will need to remove the Home button to access the LCD screen
a.
DO NOT LOSE THE TRANSPARENT RUBBER THING THAT CONNECTING ANALOG NUB TO MOTHERBOARD
b.
Flip the tab towards you, be careful, a little force should do it and put it at the safe place
4.Remove the LCD screen and put it at the safe place
5.Remove the tab using the flat head screw driver
a.
b.
6.Remove all the screws shown
a.
7.Open UMD to remove the LCD brace
8.Plan where you going to make the hole by measuring all possibilities, plan where the LED should be. This to ensure that you will not mess the trigger like I did.After all the planning, make the hole by using any method you want, eg. Drill,burr,
a.
b.
9. Now, solder your LED to the wire and insert to the trigger hole
10.Take out the speakers and solder the wire from LED to the speakers,try it after you solder to ensure its working.
a.
b.
11.It should be something like this and wire tape to prevent short-circuits/touching metals/touching wires
Assemble your PSP, good luck and enjoy,when assembling PSP,plan where is the wires shouldbe.
The rest of things,you have to figure it out for yourself.
Tips from sakobatoneko:
Quote:
Originally Posted by sakobatoneko
by the way that jell thing near the homebar should be paid very close attention, that helps control the analog stick and if you loose it you wont be able to play games that use analog stick or browse the internet.
best way to make a hole on the triggers is to drilling a hole. The wires that he used look a little to big, use 30 gauge kynar wire.
I damage the jell thingy once and my analog stick going crazy.
nice probably cant make it any simpler but still itz hard
__________________
PSP HISTORY & CURRENT CFW & 2PAC VIDS CHECK IT OUT
PSP 1. 1.50 - 2.50 -2.60 -3.00 -3.03 usb broke
PSP 2. 2.71 wrong downgrader broke first day
PSP 3. 2.71 used devhook emulate 1.50 tried to upgrade of emulated 1.50 = brick
PSP 4. 2.71 - 1.50 - 3.03oe-c to 3.40oe-a broke got fixed now on 3.52m33-4 then 3.71m33-4 tried to upgrade to 3.80m33 and 3.90m33 but didnt work dont know why so swaped psp with friends
PSP 5. 3.50 to 3.90m33-3 pandora - 3.93 cfw with 1.50 kernel - 3.95GEN - 3.95GEN-2 - 4.01m33 - 4.01m33-2 with 1.50 kernal - 5.00m33
ONLY GOD CAN JUDGE ME SO ALL U OTHER MOTHERFUCKERS GET OUT MY BUSINESS
hehe..this is just a guide to make the LED trigger,I know its not the best guide but,I've tried..i wish sako do some tutorials on this..hhaha
i dont have time to take pics,upload them, and write tutorials because of school
but i can help you in any problem you encounter while modding.
by the way that jell thing near the homebar should be paid very close attention, that helps control the analog stick and if you loose it you wont be able to play games that use analog stick or browse the internet.
best way to make a hole on the triggers is to drilling a hole. The wires that he used look a little to big, use 30 gauge kynar wire.
__________________
donate points if you appreciate my help
I mod psp's so anybody interested on getting there psp modded. PM me to see my work click here --->my mods
Last edited by sakobatoneko; 10-06-2008 at 03:05 AM.
[HARDMOD]PSP Phat LED Trigger Guide
Linear Mode
